Apprearance & Packaging

1. Adhesion of the cut edges (top and bottom) with adhesive tape. The adhesion is carried out lengthwise (running direction).

1. Adhesion of the cut edges (top and bottom) with adhesive tape. The adhesion is carried out lengthwise (running direction).

2.

At least 2 strappings (180°) are taken for stabilisation. The strapping is made of metal coil.

2.

At least 2 strappings (180°) are taken for stabilisation. The strapping is made of adhesive tape.

3.

Each coil will be labelled with a meyband^® identification sticker.

3.

Each coil will be labelled with a meyband^® identification sticker.

4.

Stacking of coils on pallets:

• Bottom position: lath
• Interleaving layers made of planed spruce wood
• Measurement 40 x 40 mm

4.

Stacking of coils on pallets:

• Bottom position: lath
• Interleaving layers made of planed spruce wood
• Measurement 40 x 40 mm

5. Each further coil will utilize interleaving wooden layers until the maximum stack height has been reached.

5. Covering of the rejected coils with cardboard continuously until the max. stack height is reached.

6. Maximum stack height: 600 mm.

6. Maximum stack height: 300 mm.

7. Once the max. stack height has been reached the final fastening of the rings with the pallet follows with 4 interleaving wood lengthwise of the pallet. Afterwards fastening of the entire pallet with a steel band.

7. Once the max. stack height has been reached a wooden shelf (40 x 40 mm) in cross direction of the pallet will be fastened with a steel band.

8. Max. pallet weight: 1.200 kg

8. Max. pallet weight: 500 kg

9. Pallet shrink wrapped with foil.

9. Pallet shrink wrapped with foil.