Steel, NE Metals, Others
Raw material thickness 0,05 - 0,60 mm (up to 1,0 mm on inquiry) x width 2,5 - 150 mm
1. Metal Strips, cold rolled - bright to dull – no surface finishing not surface coated |
||||
|---|---|---|---|---|
Steel |
||||
EN 10139 |
Strip for cold deformation / deep-drawing DC 01-06 |
|||
EN 10132-2/3/4 |
Strip for heat treatment C 75-85/90-100 S etc. |
|||
EN 10140 |
tolerances on dimensions / shape - thickness / width-length / camber |
|||
High Quality Steel |
||||
EN 10088-2/10095 |
Stainless and heat resistant (* annealed) |
|||
ferritic* |
1.4016/430 |
1.4113/434 |
||
martensitic |
1.4021/420 |
|||
austenitic CrNi* |
1.4301/304 |
1.4303/305 |
1.4828/309 |
|
austenitic CrNiMo* |
1.4401/316 |
|||
EN 10151 |
spring steels temper rolled or hardened & tempered |
1.4310/301 |
1.4372-201 |
1.4568/630 |
1.4016/430 |
1.4301/304 |
1.4401/316 |
||
Ni-alloys |
Incoloy |
Inconel |
Monel |
|
EN 10258 |
tolerances on dimensions / shape - thickness / width-length / camber |
|||
Non Ferrous Metals |
||||
Aluminum EN 23134/485 |
all economically feasible alloys on request |
|||
Copper Alloys EN 1652/1654-(10258) |
bronze CuSn, brass CuZn, nickel silver CuNi+Zn |
|||
Titanium EN 3.7025/7035-(10258) |
ASTM grade 1 or 2 etc. on request |
|||
1.1 flat |
for stamping- / bending- and deepdrawing applications |
|||
1.2 bow cambered |
Slap Wraps of cold rolled high tensile strength stainless and carbon steel strip coated and protected |
|||
2. Metal Strips, cold rolled as above / below - but pre-finished (electrolytically or hot dip) |
||||
with Cu / Ni / Sn / Zn – Ag / Au - etc. |
||||
3. Textile and other Strips |
||||
Others |
from carbon/glas or textile fibers |
|||
Your desired coil material (thickness/width/type) is not above? Please ask us!
General execution of substrates
Executions |
annealed - cold hardened / temper rolled - hardened and tempered |
|---|---|
Edges |
slit (No 3), slit with poor burr (to be defined), deburred (No 5), rounded (No 1) |
Flatness |
cold rolled-'as is', skinpassed – stretch bend leveled – heat treated |
Other Parameters |
on request |
Coil Presentation |
width: 2.5 / 16.0 mm - coil-weights </> 20 kg net pancake coil type |
width: 16 / 150 mm - coil-weights </> 120 kg net pancake coil type |
|
alternatively spooled / oscillate wound on request |
|
Packing/Shipping |
width: 2.5 - 16 mm |
width: 16 - 150 mm |
securely strapped, with cardboard or wooden square interleaves, shrink film hood |
Certificate |
as per EN 10204/3.1.B, in compliance with raw material certificates |